Dental and composite resin discoloration induced by different hydraulic calcium silicate-based cements: two-year in vitro assessment.

Few long-term studies assess the discoloration induced by hydraulic calcium silicate-based cement on dental structures. In addition, as far as we know, no long-term study has assessed the discoloration induced by these cement on composite resin. This in vitro study aimed to assess, during a period of two years, the discoloration potential of different hydraulic calcium silicate-based cements (hCSCs) on the enamel/dentin structure and composite resin restoration. A total of 40 enamel/dentin discs were obtained from bovine incisors, and 40 composite resin discs (10 mm in diameter × 2 mm thick) were fabricated. A 0.8 mm-deep cavity was made in the center of each disc and filled with the following hCSCs (n=10): Original MTA (Angelus); MTA Repair HP (Angelus); NeoMTA Plus (Avalon); and Biodentine (Septodont). An initial color measurement was performed (T0 - baseline). After 7, 15, 30, 45, 90, 300 days, and two years, new color measurements were performed to determine the color (ΔE00), lightness (ΔL'), chroma (ΔC'), hue differences (ΔH'), and whiteness index (WID). For enamel/dentin, the ΔE00 was significant among groups and periods (p<0.05). NeoMTA Plus had the greatest ΔE00. The NeoMTA Plus group had the greatest ΔE00 after two years for composite resin. Significant reduction in lightness was observed for all groups after two years (p<0.05). The most significant WID values were observed after 30 days for Biodentine (enamel/dentin) and MTA Repair HP groups (composite resin) (p<0.05). The hCSCs changed the colorimetric behavior of both substrates, leading to greater darkening over time. The Bi2O3 in the Original MTA seems relevant in the short periods of color change assessment.

In vivo Microbial Diversity Analysis on Different Surfaces of Dental Restorative Materials via 16S rDNA Sequencing.

BACKGROUND This study aimed to provide precise material selection guidance for proper clinical restoration and treatment of plaque-related oral diseases, such as dental caries and periodontal diseases. MATERIAL AND METHODS Four groups (n=24) of restorative material sheets (n=24) were prepared using 3M Z350 composite resin (ZR), zinc phosphate cement (ZPC), glass-ionomer (GI), and ICON permeable resin (IPR). Six volunteers wore a plaque-collection device equipped with the 4 restorative material sheets for 48 hours. Plaque samples were collected, and Miseq sequencing was applied to obtain template DNA fragments for microbial diversity analysis. The data were analyzed with nonparametric tests. RESULTS The microbial diversity on the ZPC surface was significantly lower than that on GI and IPR surfaces. The abundance of Firmicutes and Streptococcus on the ZPC surface was significantly higher than on the surfaces of GI and IPR. In contrast, the abundance of Porphyromonas on the surface of ZPC was significantly lower than that on GI and IPR surfaces. (P<0.05). CONCLUSIONS The results of the present study might serve as a basis for material selection under different oral microbial conditions to provide more accurate treatments and restorative procedures in the oral cavity.

Pretratamiento y mejoría de la fuerza de unión de los cementos autoadhesivos de resina a los postes / Pretreatment and improvement of bonding strength of self-adhesive resin cements to posts

ABSTRACT Introduction: Posts and core are frequently used in endodontically treated teeth with excessive loss of coronal tooth structure. Objective: To evaluate the effectiveness of self-adhesive cements under different pre-treatments of dentin in the resistance to extrusion of fiberglass posts. Methods: An experimental in vitro study was conducted. The randomly selected sample was 56 extracted bovine incisors with mature apices and without root curvature. Before the cementing procedure, pretreatment of dentin was performed with 11.5 percent polyacrylic acid, 17 percent EDTA or sodium hypochlorite. The type of failure between the post/cement/dentin was evaluated by stereomicroscope. Two hundred and sixteen bovine dentin discs were used. The disks were approximately 1 mm thick, and were obtained from 72 bovine roots restored with intraradicular retentions. Data were analyzed for better comprehension in an SPSS database for Windows version 15. Results: The highest values were found in groups G3, G4 and G5, and there was no bond strength significant difference in group G2. Conclusions: The pre-treatment had no effect on dentin bond strength, and the self-adhesive cement RelyX U100 appears to be a viable option in the cementation of fiber posts(AU)

RESUMEN Introducción: Los postes y el núcleo se utilizan con frecuencia en los dientes tratados endodónticamente con una pérdida excesiva de la estructura dental coronal. Objetivo: Evaluar la efectividad de los cementos autoadhesivos bajo diferentes pretratamientos de dentina en la resistencia a la extrusión de postes de fibra de vidrio. Métodos: Se realizó una investigación experimental in vitro en 56 dientes de ganado seleccionados al azar con cierre apical maduro y sin curvaturas radiculares. Antes del procedimiento de cementación, se llevó a cabo el pretratamiento de la dentina con 11,5 por ciento de ácido poliacrílico, 17 por ciento de EDTA o hipoclorito de sodio. El estereomicroscopio evaluó el tipo de falla entre el poste / cemento / dentina. Se usaron 216 discos de dentina bovina. Los discos tenían aproximadamente 1 mm de espesor y se obtuvieron de 72 raíces bovinas restauradas con retenciones intrarradiculares. Los datos se analizaron para una mejor comprensión en una base de datos de SPSS para Windows versión 15. Resultados: Los valores más elevados fueron encontrados en los grupos G3, G4 y G5 y no fue significativa la prueba de resistencia en el grupo G2. Conclusiones: El pretratamiento no tuvo efecto sobre la fuerza de unión dentinaria, y el cemento autoadhesivo RelyX U100 parece ser una opción viable en la cementación postes de fibra(AU)

Comparación de la fuerza de unión y la integridad marginal con compuestos de resina de relleno masivo y compuestos indirectos / Comparing bond strength and marginal integrity with direct bulk-fill resin composites and indirect composites

ABSTRACT Introduction: The clinical longevity of tooth restoration -whether directly or indirectly using composites- greatly depends on the quality and stability of the marginal adaptation. Even today, dental restoration failure is a major complication in everyday dental practice. Objective: To evaluate the effect of restoration techniques on the microtensile bond strength and marginal integrity of class II cavities. Methods: An experimental in vitro investigation was made. Preparations (5 × 4 × 2 mm) below the cement-enamel junction were performed in 45 human maxillary premolars (n= 15) that were the sample of the study selected to random. The G1 group incrementally received Spectrum TPH3 Dentsply De trey in three horizontal incremental layers. The G2 group received a bulk restoration technique (one 4-mm increment of Surefill SDR flow plus one 1-mm horizontal capping layer of Spectrum TPH3 Dentsply De trey using a metal matrix band. For the G3 group, impressions were made from each cavity preparation, and Spectrum was used to complete an indirect composite restoration. After storage (24 h/37 °C), the proximal surfaces of each tooth were polished with Sof-Lex disks. For microtensile bond strength testing, all premolars were sectioned into resin-dentine beams (0.8 mm2) and were tested under tension (0.5 mm/min). Results: Microtensile bond strength testing and marginal integrity values were not statistically significantly affected by the type of restoration technique used (p> 0.05). Conclusions: The Surefill SDR flow that used a capping layer made of conventional composite can be an alternative to reduce procedure durations as well as additional steps in the restorative technique(AU)

RESUMEN Introducción: La longevidad clínica de una restauración dental -utilizando compuestos bien directa o indirectamente- depende en gran medida de la calidad y la estabilidad de la adaptación marginal. Incluso hoy en día las restauraciones dentales fallidas constituyen una importante complicación en la práctica dental cotidiana. Objetivo: Evaluar el efecto de las técnicas de restauración en la fuerza de unión microtensil y la integridad marginal de las cavidades clase II. Métodos: Se llevó a cabo una investigación experimental in vitro. Se realizaron preparaciones (5 × 4 × 2 mm) por debajo de la unión cemento-esmalte en 45 premolares maxilares humanos (n= 15), los que constituyeron la muestra aleatoria del estudio. El Grupo G1 recibió incrementalmente Spectrum TPH3 Dentsply (De Trey) en tres capas horizontales incrementales. El Grupo G2 recibió una técnica de restauración masiva (un incremento de 4-mm de flujo de SureFil SDR más una capa de tapado horizontal de 1-mm de Spectrum TPH3 Dentsply (De Trey) utilizando una banda matriz metálica. En el Grupo G3 se realizaron impresiones de la preparación de cada cavidad, y se usó Spectrum para completar una restauración indirecta con compuesto. Después del almacenamiento (24 h / 37 °C), se pulieron las superficies proximales de cada diente con discos Sof-Lex. Para evaluar la fuerza de unión microtensil, todos los premolares fueron seccionados en haces de resina-dentina (0,8 mm2) y fueron examinados bajo tensión (0,5 mm/min). Resultados: Las pruebas de fuerza de unión microtensil y los valores de integridad marginal no fueron afectados significativamente desde el punto de vista estadístico por el tipo de técnica de restauración utilizado (p> 0,05). Conclusiones: El flujo de SureFil SDR que emplea una capa de tapado hecha de compuesto convencional puede ser una alternativa para reducir la duración del procedimiento, así como los pasos adicionales de la técnica de restauración(AU)

Investigating the nexus among environmental pollution, economic growth, energy use, and foreign direct investment in 6 selected sub-Saharan African countries.

This research seeks to enhance the current literature by exploring the nexus among environmental contamination, economic growth, energy use, and foreign direct investment in 6 selected sub-Saharan African nations for a time of 34 years (1980-2014). By applying panel unit root (CADF and CIPS, cross-sectional independence test), panel cointegration (Pedroni and Kao cointegration test, panel PP, panel ADF), Hausman poolability test, and an auto-regressive distributed lag procedure in view of the pooled mean group estimation (ARDL/PMG), experimental findings disclose that alluding to the related probability values, the null hypothesis of cross-sectional independence for all variables is rejected because they are not stationary at levels but rather stationary at their first difference. The variables are altogether integrated at the same order I(1). Findings revealed that there is a confirmation of a bidirectional causality between energy use and CO2 in the short-run and one-way causality running from energy use to CO2 in the long run. There is additionally a significant positive outcome and unidirectional causality from CO2 to foreign direct investment in the long run yet no causal relationship in the short run. An increase in energy use by 1% causes an increase in CO2 by 49%. An increase in economic growth by 1% causes an increment in CO2 by 16% and an increase in economic growth squared by 1% diminishes CO2 by 46%. The positive and negative impacts of economic growth and its square approve the EKC theory. To guarantee sustainable economic development goal, more strict laws like sequestration ought to be worked out, use of sustainable power source ought to be stressed, and GDP ought to be multiplied to diminish CO2 by the utilization of eco-technology for instance carbon capturing, to save lives and also to maintain a green environment.

How the Variations of the Thickness in Ceramic Restorations of Lithium Disilicate and the Use of Different Photopolymerizers Influence the Degree of Conversion of the Resin Cements: A Systematic Review and Meta-Analysis.

PURPOSE: The purpose of this meta-analysis was to evaluate how the thickness variations in ceramic restorations of lithium disilicate and the use of different photopolymerizers influence the degree of conversion of the resin cements. METHODS: This study was performed according to the PRISMA checklist. The bibliographic research was performed to identify in vitro studies until December 2017 in the databases MEDLINE via PubMed, Web of Science, and Scopus. The selected studies were submitted to bias risk assessment. In the meta-analysis the data were evaluated using Review Manager Software v.5.3, with random-effect model at a 5% significance level. RESULTS: The meta-analysis in this study showed that despite the translucency of lithium disilicate, significant reduction of light was observed when activated through the ceramic. The degree of conversion was higher in the control groups in which the resin cement was photopolymerized without the interposition of the ceramic material. CONCLUSIONS: The thinner the ceramic material, the higher the degree of conversion. A thickness greater than 1.0 mm drastically reduces the degree of conversion of dual-curing or light-curing resins. The curing unit with irradiance of 3200 to 3505 mW/cm2 showed improvements in conversion values.

Development and evaluation of calcium hydroxide-coated, pericardium-based biomembranes for direct pulp capping.

AIM: The aim of the present study was to develop a bovine pericardium biomembrane (BPB) and to evaluate pulp response in vivo. METHODS: A double-layer bovine BPB/chitosan was manufactured, and the porous chitosan side was coated with calcium hydroxide. The microstructure of the matrices was evaluated with electron microscopy. To test pulp response, cavities were prepared on the occlusal surface of Wistar rats' mandibular left first molars and capped with matrices, followed by appropriate adhesives/composite restorations. The animals were divided into three groups: group 1, calcium hydroxide alone; group 2, BPB without calcium hydroxide; and group 3, BPB coated with calcium hydroxide. Specimens were processed and histologically evaluated at 7, 14, and 30 days, postoperatively. RESULTS: Electron microscopy showed porous chitosan surface and a cohesive calcium hydroxide layer. Histological analysis showed that groups 1 and 3 had mild odontoblast layer disorganization, but normal pulp tissue appearance at 7, 14, and 30 days. At the same time points, group 2 showed a loss of general pulp tissue, pulp necrosis, and periapical abscess in some teeth. CONCLUSION: Coated bovine pericardium-based biomembranes resulted in favorable outcomes in cases of pulp exposure after a 30-day observation period, and might protect against injuries caused by adhesive systems and composites.

Resin Cement: Correspondence with Try-In Paste and Influence on the Immediate Final Color of Veneers.

PURPOSE: To assess the correspondence of shades between try-in pastes and resin cements and their influence on the final color of veneers. MATERIALS AND METHODS: Bovine teeth (n = 140) were prepared and divided into 2 groups (a or b) according to ceramic veneer thickness (0.35 or 0.70 mm). Seventy teeth (n = 70) were distributed in 7 groups (groups 1 to 7a and groups 1 to 7b; n = 10). Try-in pastes and their corresponding resin cements were used according to the value: groups 1a and 1b (value -3); groups 2a and 2b (-2); groups 3a and 3b (-1); groups 4a and 4b (0); groups 5a and 5b (+1); groups 6a and 6b (+2); groups 7a and 7b (+3). Color measurements were performed with spectrophotometer, and the coordinates L* , a* , and b* were obtained. The final color change (ΔE) was calculated from these coordinates: ΔE0 (trial - substrate), ΔE1 (cementation - substrate), and ΔE2 (cementation - trial). The data were analyzed using the Kolmogorov-Smirnov test, the Wilcoxon test, or t-test for paired samples and repeated-measures ANOVA, post hoc Bonferroni, or the Friedman test (p < 0.05). RESULTS: The results indicated no statistically significant difference between the groups comparing ΔE0 and ΔE1 for 0.35 mm thickness laminate veneers, except for groups 2a and 5a. For 0.70 mm thickness laminate veneers, no statistically significant differences were observed between the groups comparing ΔE0 and ΔE1. ΔE2 values for 0.35 mm and 0.70 mm thickness laminate veneers ranged from 1.77 ± 0.81 to 4.99 ± 3.80 and from 1.01 ± 0.73 to 4.66 ± 2.96, respectively. CONCLUSIONS: Try-in pastes correspond with their respective resin cements for most colors investigated. The color of the resin cement may influence the final color of laminate veneers. Thickness of the ceramic was the most relevant variable for color change.

Evaluation of Radiopacity of Luting Cements Submitted to Different Aging Procedures.

PURPOSE: To evaluate the radiopacity of luting cements submitted to different aging procedures. MATERIALS AND METHODS: Twenty discs (1 × 4 mm) of each of the following cements were prepared: zinc phosphate, RelyX Luting 2, Variolink 2, AllCem, RelyX U200, Multilink, Panavia F2.0, and RelyX ARC. Then, they were randomly divided into two groups (n = 10/group), according to the aging procedure: thermal cycling group and water storage group. Before and after aging procedures, specimens were x-rayed with an aluminum step-wedge (11 steps, 1 mm thick each) and three dental slices (1 mm thick). The radiopacity was evaluated by means of optical density, which was measured using ImageJ software. The values were converted into millimeters of aluminum with a logistic regression calibration curve. The data were analyzed by one-way ANOVA and Tukey post-hoc test (α = 0.05). RESULTS: In the thermal cycling group, RelyX Luting 2, RelyX U200, and Panavia F2.0 showed a statistically significant reduction in radiopacity (p < 0.05). In the water storage group, all cements showed a significant reduction in radiopacity (p < 0.05), and RelyX Luting 2 and Panavia F2.0 performed below the desired ISO 4049 standard. CONCLUSIONS: The radiopacity of luting cements can decrease after aging, especially after 1-year water storage.

Evaluation of marginal leakage after mechanical fatigue cycling of composite inlays luted with different cements.

This in vitro study evaluated the marginal microleakage of composite inlays luted with 3 different cement systems. The null hypothesis was that the luting materials would not influence dye penetration, showing the same degree of microleakage. Thirty-six sound molars were selected, mesio-occlusodistal cavities were prepared, and the teeth were randomly divided into 3 groups (n = 12). Composite resin inlay restorations were made and cemented using a dual-curing resin cement (Calibra), a light-curing flowable composite (Charisma Flow), or a self-adhesive resin cement (RelyX Unicem). The restored teeth were subjected to fatigue cycles and immersed in 0.5% basic fuchsin dye for 24 hours. Two orthogonal cuts were made to enable evaluation of dye penetration at the cervical and occlusal margins. The sections were evaluated with a 4-point scale ranging from 0 (no penetration) to 3 (penetration up to the cavity floor [occlusal margins] or axial wall [cervical margins]). The Calibra and Charisma Flow groups showed greater microleakage, notably at the cervical margins, whereas RelyX Unicem specimens showed the least dye penetration. Significant differences were found between the Calibra and Charisma Flow groups and between the Charisma Flow and RelyX Unicem groups (P < 0.05). No statistically significant differences were detected between the Calibra and RelyX Unicem groups. The microleakage associated with the flowable composite was significantly greater than that associated with both resin cements, results that discourage its use for luting of Class II composite inlays.

Natural saliva as an adjuvant in a secondary caries model based on Streptococcus mutans.

OBJECTIVE: Two factors for secondary caries formation were evaluated using an artificial biofilm model, saliva as additive in culture medium and bonding procedures of composite materials for artificial gap creation. DESIGN: Standardized cavities were prepared in bovine tooth samples (n = 44), treated with two different bonding pretreatments, restored and after artificial ageing incubated with Streptococcus mutans in a Mueller-Hinton-Broth-Sugar medium with or without human saliva for seven days. Secondary caries formation was analyzed using confocal laser scanning microscopy and transversal microradiography. RESULTS: Lesions were significantly pronounced in groups using saliva, but were not influenced by the bonding pretreatments. CONCLUSIONS: The results indicate that the addition of saliva, but not the type of bonding procedure influences the outcome in the present biofilm-based secondary caries model.

Cytotoxicity of Self-Adhesive Resin Cements on Human Periodontal Ligament Fibroblasts.

The aim of this study was to evaluate the potential cytotoxicity of self-adhesive resin cements with or without light irradiation on human periodontal ligament fibroblasts (HPDLFs) in vitro. Three self-adhesive resin cements (RelyX U200, Maxcem Elite and Multilink Speed) were cured with light or not. Cured cements were stored at 37°C for 24 h in water or Dulbecco's modified eagle medium (DMEM) medium. Their chromatographic analysis of water-based extract solution was made and then the DMEM-based extract solution was diluted in complete DMEM {1:5, 1:10, 1:20, 1:40, 1:80 (v/v)} for evaluating cell relative growth rate and cell apoptosis/necrosis rate of HPDLFs. The data was analyzed by one-way ANOVA and independent T test. Regardless of light irradiation, cell relative growth rate increased, and the apoptosis/necrosis rate of each resin cement decreased with the increase of gradient dilution. Regardless of gradient dilution, the cell relative growth rate and apoptosis/necrosis rate of RelyX U200 and Maxcem Elite with light irradiation were higher than those without light irradiation. Besides, without light irradiation, Multilink Speed showed higher cell relative growth rate and lower apoptosis/necrosis rate than other cements. Light irradiation and composition difference of self-adhesive resin cements could affect their cytotoxicity on HPDLFs.

Comparison of Hypersensitivity in Metal Ceramic Crowns cemented with Zinc Phosphate and Self-adhesive Resin: A Prospective Study.

BACKGROUND: Luting agents used to fix artificial prostheses, such as fixed partial denture (FPD) to tooth are basically viscous in nature and show chemical reaction for fixation. Postcementation hypersensitivity is a frequent complaint of patients. The present study was conducted to compare postcementation hypersensitivity with zinc phosphate and self-adhesive resin in complete coverage crown. MATERIALS AND METHODS: This study included 30 patients in which 60 porcelein fused to metal crowns was placed. Two metal crowns were placed in each patient in nonantagonis-tic contralateral quadrants. First crown was cemented with zinc phosphate cement, while the other was cemented with self-adhesive resin. Hypersensitivity was evaluated by visual analog scale (VAS) score and by clinical test. For clinical evaluation of sensitivity, hot and cold water was applied to the cervical margin of restoration for 5 seconds and response was recorded. RESULTS: This study consisted of 30 patients in which 60 crowns were given. There was no statistical difference in VAS score of mastication in zinc phosphate cement recorded at baseline, 1 week, 4 weeks, 6 months, 1 year, and 2 years (p > 0.05). Cold response also did not show a significant difference at six time points. Warm response showed slight decrease in subsequent time points but was nonsignificant (p > 0.05). Similarly, with self-adhesive resin cement, VAS score during mastication, hot and cold response was statistically nonsignificant (p > 0.05). CONCLUSION: Postcementation hypersensitivity is a frequent complaint that patient may experience. However, we found no statistically significant difference in both cements tested. CLINICAL SIGNIFICANCE: Postcementation hypersensitivity is an unpleasant sensation experienced by patients. This may affect the success of any prosthesis. Thus, selection of luting agent for cementation plays an important role to eliminate this symptom.

Formation of persisters in Streptococcus mutans biofilms induced by antibacterial dental monomer.

Antibacterial monomers can combat oral biofilm acids and caries; however, little is known on whether quaternary ammonium monomers (QAMs) would induce drug persistence in oral bacteria. The objectives of this study were to investigate the interactions of Streptococcus mutans (S. mutans) with dimethylaminohexadecyl methacrylate (DMAHDM), and determine for the first time whether DMAHDM could induce persisters in S. mutans. DMAHDM was synthesized using a modified Menschutkin reaction. Dose-dependent killing curves and time-dependent killing curves of planktonic S. mutans and biofilms were determined to evaluate drug persistence, using chlorhexidine (CHX) as control. The inheritability assay, minimum inhibitory concentration (MIC) and live/dead biofilm assay were determined to investigate persister characteristics. DMAHDM matched the killing potency of the gold standard CHX against S. mutans biofilms. DMAHDM and CHX induced drug persistence in S. mutans biofilms but not in planktonic bacteria. S. mutans biofilm persistence was not inheritable in that the tolerance to DMAHDM or CHX of the surviving persisters in the initial population was not transferred to subsequent generations, as displayed by the inheritability assay. The MIC of S. mutans parental strain and induced persisters remained the same. The induced persisters in S. mutans biofilms could be eliminated via higher doses of 300 µg/mL of DMAHDM and CHX. In conclusion, this study showed for the first time that (1) DMAHDM induced persisters only in biofilms, but not in planktonic bacteria; and (2) both DMAHDM-induced and CHX-induced S. mutans persister biofilms could be completely eradicated by even higher concentrations of DMAHDM and CHX. More studies are needed on the induction of persisters in oral biofilms for the development and use of a new generation of antibacterial dental monomers and resins.

Microleakage of Class II composite resin restorations with self-adhesive composite resin liners.

This study investigated the microleakage of Class II composite restorations with composite resin liners. Standardized box cavities were prepared on the mesial and distal surfaces of 84 extracted intact human molars. Proximal margins were located in enamel (occlusal) and 1.0 mm apical to the cementoenamel junction (gingival). The teeth were randomly divided into 6 groups (n = 28 cavities) and restored with Filtek Z350 nanohybrid composite resin (FZ). The test groups were lined with a conventional flowable composite resin, Premise Flowable (PF), or 1 of 2 self-adhesive composites (SACs): Vertise Flow (VF) or Clearfil SA luting cement (CSA) with or without their respective self-etching adhesives: Optibond All-in-One (OB) or Clearfil SE Bond (CSE). The adhesive/lining procedure was performed as follows: OB/FZ (control), OB/PF/FZ, VF/FZ, OB/VF/FZ, CSA/FZ, or CSE/CSA/FZ. Microleakage was evaluated at the occlusal and gingival margins using a dye penetration technique and quantitative assessment. Kruskal-Wallis and Mann-Whitney U tests were used to analyze the data at the significance level of α = 0.05. None of the restorative techniques was capable of preventing microleakage completely. The greatest amount of microleakage was detected in the VF/FZ and CSA/FZ groups at both margins (P < 0.02). Among the groups placed with a bonding agent, OB/VF/FZ showed significantly greater values of microleakage at the occlusal margins than did OB/FZ, OB/PF/FZ, and CSE/CSA/FZ (P < 0.05). At the gingival margins, the OB/PF/FZ group exhibited the least leakage compared with the OB/VF/FZ and CSE/CSA/FZ groups (P < 0.001). The results indicated that the additional application of bonding agents improved the marginal sealing of SACs in Class II composite restorations.

Evaluation of hypersensitivity after the placement of metal-ceramic crowns cemented with two luting agents: Long-term results of a prospective clinical study.

STATEMENT OF PROBLEM: Different luting materials are available for the cementation of fixed dental prostheses. Postcementation hypersensitivity is an occasional complication in the definitive delivery. How the choice of luting agent affects long-term postcementation sensitivity is unknown. PURPOSE: The purpose of this prospective, randomized, controlled, split-mouth clinical trial was to compare the hypersensitivity of 2 cementation methods for metal-ceramic crowns. The primary endpoint was the evaluation of differences in hypersensitivity between the study groups over a study period of 5 years. MATERIAL AND METHODS: The study investigated 20 participants with 40 metal-ceramic crowns cemented with either zinc phosphate cement or a self-adhesive resin cement, each in nonantagonistic contralateral quadrants (observation period of 5 years). The data regarding postcementation hypersensitivity included continuous patient-related outcome variables assessed using a visual analog scale (sign test; primary endpoint, level of significance α/3=.0167; secondary endpoint, level of significance, α=.05) and categorical variables represented by yes/no replies (absolute and relative frequencies). The sensitivity of teeth was controlled in relation to mastication, air streams, and hot and cold temperatures. RESULTS: The observation period was 5 years, with a dropout rate of 12.5% in the last 2 years. The results indicated no significant differences between the cement groups for patient- and clinical-related outcomes at any of the observed time points. CONCLUSIONS: As no differences were found between the 2 different cementation modes with respect to developing hypersensitivity after 5 years, the choice of a luting agent remains an individual practitioner decision.

In vitro effects of dental cements on hard and soft tissues associated with dental implants.

STATEMENT OF PROBLEM: Dental cements for cement-retained restorations are often chosen based on clinician preference for the product's material properties, mixing process, delivery mechanism, or viscosity. The composition of dental cement may play a significant role in the proliferation or inhibition of different bacterial strains associated with peri-implant disease, and the effect of dental cements on host cellular proliferation may provide further insight into appropriate cement material selection. PURPOSE: The purpose of this in vitro study was to investigate the cellular host response of bone cells (osteoblasts) and soft tissue cells (gingival fibroblasts) to dental cements. MATERIAL AND METHODS: Zinc oxide (eugenol and noneugenol), zinc phosphate, and acrylic resin cements were molded into pellets and directly applied to confluent preosteoblast (cell line MC3T3 E1) or gingival fibroblast cell cultures (cell line HGF) to determine cellular viability after exposure. Controls were defined as confluent cell cultures with no cement exposure. Direct contact cell culture testing was conducted following International Organization for Standardization 10993 methods, and all experiments were performed in triplicate. To compare either the MC3T3 E1 cell line, or the HGF cell line alone, a 1-way ANOVA test with multiple comparisons was used (α=.05). To compare the MC3T3 E1 cell line results and the HGF cell line results, a 2-way ANOVA test with multiple comparisons was used (α=.05). RESULTS: The results of this study illustrated that while both bone and soft tissue cell lines were vulnerable to the dental cement test materials, the soft tissue cell line (human gingival fibroblasts) was more susceptible to reduced cellular viability after exposure. The HGF cell line was much more sensitive to cement exposure. Here, the acrylic resin, zinc oxide (eugenol), and zinc phosphate cements significantly reduced cellular viability after exposure with respect to HGF cells only. CONCLUSIONS: Within the limitation of this in vitro cellular study, the results indicated that cell response to various implant cements varied significantly, with osteoblast proliferation much less affected than gingival fibroblast cells. Furthermore, the zinc oxide noneugenol dental cement appeared to affect the cell lines significantly less than the other test cements.

Cytotoxic effects of bulk fill composite resins on human dental pulp stem cells.

Five bulk fill composite resins, including SDR, Tetric EvoCeram Bulk Fill (TEC), X-trafil (XTF), Sonic Fill (SF), Filtek Bulk Fill (FBF), were used in this study. Human dental pulp stem cells were cultured in 12-well culture dishes (3 × 104 cells per cm(2)) and stored in an incubator at 37°C and 5% CO2 for 1 day. On days 1, 7, 14, and 21 of co-culture, viable cells were measured using a WST-1 assay. Lower cell viability was observed with XTF and SDR bulk fill composite resins compared to the control group during the WST-1 assay. Although bulk fill composite resins provide advantages in practical applications, they are limited by their cytotoxic properties. (J Oral Sci 58, 299-305, 2016).

Cytotoxicity evaluation of luting resin cements on bovine dental pulp-derived cells (bDPCs) by real-time cell analysis.

To evaluate the cytotoxicity of resin cements on dental pulp-derived cells (bDPCs), Bifix QM (BQM), Choice 2(C2), RelyX U200(RU200), Maxcem Elite(ME), and Multilink Automix(MA) were tested. The materials were incubated in DMEM for 72 h. A real-time cell analyzer was used to evaluate cell survival. The statistical analyses used were one-way ANOVA and Tukey-Kramer tests. BQM, RU200, and ME demonstrated a significant decrease in the bDPCs' index at 24 and 72 h (p≤0.001). These materials were found to be the most toxic resin cements, as compared to the control and other tested materials (C2 and MA). However, C2 and MA showed a better survival rate, compared to BQM, RU200, and ME, and had lower cell index than the control group. The cytotoxic effects of resin cements on pulpa should be evaluated during the selection of proper cements.

Microleakage of 4 post-luting cements evaluated by the computerized fluid filtration method.

PURPOSE: The aim of this study was to evaluate the microleakage of 4 fiber post-luting systems using the computerized fluid filtration method. METHODS: 60 extracted human mandibular permanent premolar teeth were used for the study. The teeth were instrumented with Hedstroem files up to size 60, post spaces were prepared and then Unicore fiber posts were cemented using 4 luting systems. Group1: Duolink, Group 2: Resinomer, Group 3: Fuji Plus, Group 4: Multilink Sprint, Group 5: Positive Control, and Group 6: Negative Control. The samples were stored in distilled water for 2 weeks and then microleakage was evaluated. Data were analyzed with 1 way-ANOVA and Dunett T3 tests (P<.05). Groups 2 and 3 significantly exhibited higher microleakage values than groups 1 and 4 (P<.05). RESULTS: Resin cements used with total etch-bonding systems demonstrated lower microleakage values than the other cements. CONCLUSIONS: Reduction of steps in dentin conditioning of resin luting cements may have a promoting effect on microleakage.